Here’s an easy way:
1. Choose a container for your gel candle. Glass shows off the gel best, but you can use any non-flammable container. Plan to have the wick at least 1 1/2 inches away from the sides.
2. Dribble a spot of hot glue on the bottom of the container.
3. Stick the wick tab onto the hot glue and let it cool. Use zinc core wick. Cotton will absorb too much gel.
4. Cut the gel wax into small cubes. This will allow it to melt faster.
5. Put the wax into a stainless steel or glass pot and turn the heat on medium. Monitor the temperature carefully with a thermometer. Your goal is 200 degrees F.
6. Maintain a temperature of 200 degrees F until the gel is smooth and syrupy.
7. Use a liquid dye made for gel candles for optimum effects. Water-base and paste dyes won’t mix, and color blocks used for regular wax candles may make the gel cloudy.
8. Add 1/4 teaspoon of essential oil or candle scent to the melted gel.
9. Remember that alcohol-base scents (such as vanilla) may cause cloudiness.
10. Check the gel. If it’s cloudy, try melting a couple more cubes of gel in it. This sometimes helps.
11. Choose a level pouring surface where you can leave the candle to set.
12. Preheat the container to 150 degrees F to keep bubbles to a minimum.
13. Pour the wax into the container as if you’re pouring beer – down the side to prevent bubbles. The higher the pouring temperature, the fewer bubbles. Sometimes you want bubbles for effect, in which case you should let the gel cool to 175 degrees F before pouring.
14. Pull the wick up straight and center it.
15. Let the candle set for 4 hours.
16. Trim the wick to 1/4 inch.
and in case you want embedded objects in the candle then :
1. Use anything that is not flammable: glass beads, marbles, glitter, sand, shells, colored aquarium gravel, crystals, pebbles, polished stones, artificial jewels or pearls, wax fruit, metal charms, etc.
2. Dip the items in the hot gel before you add coloring. This will help keep bubbling down.
3. Put in the objects that you want on the bottom before you pour. These can help camouflage the wick tab.
4. Pour a layer of gel and add objects, repeating this in layers. Keep objects away from the wick and remember that the closer they are to the outside of the container, the easier they will be to see.
Here’s an easy way:
1. Choose a container for your gel candle. Glass shows off the gel best, but you can use any non-flammable container. Plan to have the wick at least 1 1/2 inches away from the sides.
2. Dribble a spot of hot glue on the bottom of the container.
3. Stick the wick tab onto the hot glue and let it cool. Use zinc core wick. Cotton will absorb too much gel.
4. Cut the gel wax into small cubes. This will allow it to melt faster.
5. Put the wax into a stainless steel or glass pot and turn the heat on medium. Monitor the temperature carefully with a thermometer. Your goal is 200 degrees F.
6. Maintain a temperature of 200 degrees F until the gel is smooth and syrupy.
7. Use a liquid dye made for gel candles for optimum effects. Water-base and paste dyes won’t mix, and color blocks used for regular wax candles may make the gel cloudy.
8. Add 1/4 teaspoon of essential oil or candle scent to the melted gel.
9. Remember that alcohol-base scents (such as vanilla) may cause cloudiness.
10. Check the gel. If it’s cloudy, try melting a couple more cubes of gel in it. This sometimes helps.
11. Choose a level pouring surface where you can leave the candle to set.
12. Preheat the container to 150 degrees F to keep bubbles to a minimum.
13. Pour the wax into the container as if you’re pouring beer – down the side to prevent bubbles. The higher the pouring temperature, the fewer bubbles. Sometimes you want bubbles for effect, in which case you should let the gel cool to 175 degrees F before pouring.
14. Pull the wick up straight and center it.
15. Let the candle set for 4 hours.
16. Trim the wick to 1/4 inch.
and in case you want embedded objects in the candle then :
1. Use anything that is not flammable: glass beads, marbles, glitter, sand, shells, colored aquarium gravel, crystals, pebbles, polished stones, artificial jewels or pearls, wax fruit, metal charms, etc.
2. Dip the items in the hot gel before you add coloring. This will help keep bubbling down.
3. Put in the objects that you want on the bottom before you pour. These can help camouflage the wick tab.
4. Pour a layer of gel and add objects, repeating this in layers. Keep objects away from the wick and remember that the closer they are to the outside of the container, the easier they will be to see.
You can find out on Jello’s website http://www.jello.com